Markbass Little Mark Vintage Bass Amplifier

Markbass

MBH110090Z

The Little Mark Vintage is the result of years of experience and it was designed to really let everybody find his own tone, no matter the needs or personal taste, offering lots of sound options and features really satisfying all bass players searching for both modern and old school tones.

As used by Mark King, this one is part of the Gold Series, a state of the art lineup offering superior quality, recognizable by its catching new look marking a new era at Markbass, starting from gold plated circuits, to the highly selected components, to some of the most requested features!

Key points

The Little Mark Vintage features a 12AX7 Tube Preamp, for a rich and warm tone full of harmonics.

The new Limiter Control offers a modern reaction when you set it all the way up, put it down to zero to create that old school gritty drive, and everything in between!

The new EQ settings and filter Switch. The 4 Bands EQ of the Little Mark Vintage have a new setting on frequencies centre, all tuned to offer a balanced tone that easily sits in the mix, plus a switch with three EQ preset options to give you a FLAT setting, a CUT one with scooped Mids and enhanced Low and High and an OLD one with scooped High to get an old vintage style tone.

A Real DI box! The Balanced DI Out with transformer is optimized to give pure, full, rich, linear sound on all frequencies. Although Little Mark amp heads already feature high-quality DI circuitry, the transformer upgrades the DI performance offering a real DI box inside the head, handling extreme transients without introducing any distortion or coloration.

Foot-switchable Mute has been one of the most requested features in order to tune or switch an instrument in a silent way. The optional Dual Footswitch also allows to turn the EQ section on and off.

MPT - Mark Proprietary Technology. Nearly all the other bass amps on the market use the same power amps from different manufacturers, which have not been specifically designed for bass. At Markbass, Marco De Virgiliis invested a lot on R&D to create their own proprietary power amp technology, specifically designed to respect and glorify the tone of your instrument.

Specification -

Inputs:
1 x 1/4", Footswitch (optional)
Controls:
Gain, Master Volume, DI out Level, Limiter, 4 band EQ, 3-Way Filter Switch (Flat, Cut, Old), Ground Lift and PRE/POST EQ (switches on rear panel)
Outputs:
Line Out, Effects loop, Tuner Out, Speaker out
Spec:
500W RMS @ 4 ohms / 300W RMS @ 8 ohms
Speakers:
1 x Speakon/1/4" combi, 1 x 1/4"
Impedance:
Minimum 4 Ohms
Dimensions:
276x83x250mm
Weight:
2.5kg

Collections: Markbass, Markbass Amps and Cabs

Type: Bass Head